CYUSB3KIT-001 EZ-USB FX3 Development Kit Guide, Doc. #: 001-70237 Rev. *C
56
Kit Operation
5. Select
Bulk out endpoint (0x1)
in the left pane of Control Center. Enter
AA
in
Data to send
(Hex)
, and
1
in
Bytes to Transfer
, and click the
Transfer Data-OUT
button.
Figure 3-26
illustrates these steps.
Figure 3-26. Sequence of steps for transferring data
6. To receive the same data on EP2 IN, select
Bulk in endpoint (0x81)
, enter
1024
(max packet
size) in
Bytes to Transfer Length = 1024
, and click the
Transfer Data-IN
button to receive the
same data, as shown in
Figure 3-27
.
Figure 3-27. Sequence of steps for receiving data
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from