CynkoMet RS-1500, Инструкция по использованию и эксплуатации

Страница: 61 / 101

Cynko Met
RS-1500
61
7. Transport
The spreader is prepared for sale in a complete state and does not require
packing. Only the instruction manual of machine handling and the connecting cable
of the electrical system undergo packaging.
The delivery of the spreader to the user is done by independent transport after
connecting with the tractor or automobile (in this case, the spreader because of the
height can be mounted on the platform of the transport mean on the hubs - with
Improper operation
of the hydraulic
system
Improper hydraulic oil
viscosity
Check the quality of oil, make sure that
the oil in both machines is of the same
type.
If necessary, replace the oil in the
tractor and / or spreader
Insufficient efficiency
of the tractor
hydraulic pump,
damaged tractor
hydraulic pump
Check the hydraulic pump on the
tractor.
Damaged or polluted
engine or actuator
Check the actuator's piston: bending,
corrosion, tightness; Repair the engine's
mandrel – damage, pollution; if
necessary, repair or replace the
actuator or engine.
Excessive load of
actuator or engine
Reduce conveyor feed rate; Check and,
if necessary, remove residual material
on plates before start-up; Check
whether anything is blocking the
actuator's work;
Damaged hoses
Check to make sure that the hydraulic
hoses are tight, not refracted and
properly looped. If necessary, replace
or tighten.