CynkoMet RS-1500, Инструкция по использованию и эксплуатации

Страница: 57 / 101

Cynko Met
RS-1500
57
Stains/discolorations in various shades of gray present on the zinc coating do not
constitute grounds for claims, as long as the zinc coating still has the required
minimum thickness (PN-EN ISO 1461: 2000)
– in the case of proper machine
maintenance, such stains are a natural process that do not affect the coating's
properties.
In the case of damage of the external paint coating, the damaged areas must be
cleaned of rust and dust, degreased, and painted retaining the same color and
uniform thickness of the protective coating. Until painting, the damaged areas should
be covered with a thin layer of grease or anticorrosion preparation.
During a long break in the use of the spreader, it is recommended to place it
indoors in a closed room or in a roofed and ventilated place.
6.9 Adjustment of conveyor drive and adapter drive chain tension.
The tensioner (item 1, fig. 13 and fig. 14) serves to adjust the tension of the floor
conveyor’s and adapter’s drive chain. The play on the working part of the chain at half
of its length should be 5- 15mm, and 5- 20mm near the adapter's drive.
In the case of detecting greater play than mentioned above:
•
Loosen fixing screws. (item 2, fig. 21 and fig. 22)
•
Slide the tensioners (item 1, fig. 21 and fig. 22) in the direction of the chain (item
3, fig. 21 and fig. 22) until the proper play is achieved and then fasten screws
once again (item 2, fig. 21 and fig. 22).
If elimination of play by means of tensioners proves to be impossible, shorten the
chain by one or more links.