CynkoMet RS-1500, Инструкция по использованию и эксплуатации

Страница: 33 / 101

Cynko Met
RS-1500
33
Figure 13. Ordinary hitch
NOTE!
NOTE!
Make sure that the jointed telescopic shaft meets the following
specifications in the case of an ordinary hitch:
•
Nominal torque: min. 400 Nm;
•
Nominal revolutions 540 rpm;
•
Distance between joint axes:
o
In collapsed state, no more than 230 mm;
o
In extended state, no less than 505 mm;
• Certified with “CE” mark;
In the case of a one-sidedly wide-angle shaft and turning hitch:
•
Category: 4
•
Nominal moment: 460 Nm
•
total length when collapsed (minimum) : 1000 mm
•
total length when extended (maximum) : 1340 mm
•
Certified with “CE” mark;
NOTE!
NOTE!
Before each maneuver of reversing and start of spreading the
material loaded on the load box, use of the beep signal 2
times is recommended in the tractor in order to inform
bystanders about the threat.
NOTE!
NOTE!
It is strictly prohibited for the operator to leave the tractor’s
cabin when:
- the engine is running
- the key is in the ignition switch.