CynkoMet RS-1500, Инструкция по использованию и эксплуатации

Страница: 34 / 101

Cynko Met
RS-1500
34
NOTE!
NOTE!
Take special caution while the machine is working. Do not
insert limbs into hazardous areas. Adhere to the markings on
the spreader (pictograms).
After completion of the test drive / start-up, check the tightness of the nuts of
the driving wheels, with the engine switched off (key removed from the ignition), and
chocks placed under wheels.
NOTE!
NOTE!
Careless and improper use and operation, as well as non-
compliance with the recommendations contained in this manual
pose a threat to life and health.
4.3.2 Preparation for the spreader’s work
In preparation for the spreader’s work, the following should be checked:
•
the wear and condition of the tires and driving wheels,
•
Air pressure in the tires,
•
condition of the drive axle,
• tightening of the driving wheels to wheel hubs and the condition of other threaded joints.
In addition, after combining the machine with the tractor check: the serviceability of the
electrical system and lighting system of the spreader,
4.3.3 Loading the spreader.
NOTE!
NOTE!
Presence of third parties between machines is absolutely prohibited at
the time of aggregation of the spreader to the tractor. Failure to follow
these instructions and perform the maneuver correctly can lead, in
extreme cases, to death of the person who are between the spreader
and the tractor.