Cybertech PX922E, Руководство по эксплуатации продукта

Страница: 38 / 42

APPENDIX A-11
Setting up the Cybertech Windows 9x Printer Driver
1. Boot up Windows 95
2. Click on the "START" icon.
3. Go to "Settings"
4. Click on "Printer"
4. Click on "Add Printers"
6. Click on "Next"
7. Click on "Have Disk"
8. Insert a Copy of the Cybertech Windows Printer drivers in
Floppy Drive "A".
9. At the prompt: "Copy Manufacture's files from" change the
default if required" then click on "OK".
10. Click on the Model you wish to install example: "Cybertech
9450".
11. Click on "Next"
12. Click on "Next" Prompt: "Do you want Windows based programs to
use this printer as the default" Click on "Yes".
13. Click on "Next"
14. Prompt: "Would you like to print a test page " click on "No".
14. Click on "Finish".
16. Click on "Cybertech 9x50".
17. Click on the Properties icon (hand on top of page).
18. Click on "Details".
19. Click on "Spool settings"
20. Click on "Print directly to the printer"
21. Click on "OK"
22. Click on "Port Settings".
be sure there is no mark in the box "Spool MS-DOS print jobs".
be sure there is a mark in the box "Check port state before
printing"
23. Click on "OK"
24. Click on "Ok"
24. Click on "x” or "Ctrl & F4" to exit printer setup
"Windows 95" is a trademark of Microsoft Corp.