Cybertech PX922E, Руководство по эксплуатации продукта

Страница: 23 / 42

Miscellaneous Commands
4.2.36 Print Current Font (1B 1B)
This will print the entire character set of the currently selected
font
4.2.37 Print software revision (1B 31 0D)
This command prints the current software on the printer.
4.2.38 Print Configuration (1B 32)
This will print the printer’s current configured parameters. A test
print will also do the same.
4.2.39 Set Printer Defaults (1B 33 1B)
This forces the printer to the factory defaults
4.2.40 SET LINE FEED ENABLE (1B 4B x)
When this sequence is received a line feed is added/not added to
receipt of a CR. When x = hex 30 , line feeds are enabled, when x =
hex 31 line feeds are not enabled. This is a semi-permanent stored
byte internal to the microprocessor's RAM. This stays set at power
off.
4.2.41 DOUBLE HIGH ON (1B,64 or 0E)
When Double High is on all printable data will be expanded to
twice the height.
4.2.42 DOUBLE HIGH OFF (1B,65 or 0F)
When Double High is set off it will be deactivated at the start
of a carriage return.