Cybertech PX922E, Руководство по эксплуатации продукта

Страница: 12 / 42

2.4 TAKE-UP LOADING
1. Removable core snaps between the two rotating discs (see
Figure 2.3). The slot in the removable core must be aligned
with the drive pin on the left side disc.
2. This is accomplished by placing the end of the core onto the
right side disc hub and applying slight pressure to move the
spring loaded disc. Then placing the right end of the core
onto the left side disc hub making sure to align the drive
pin.
3. Place the loose end of the paper exiting the printer into the
slot in the removable core. It helps if the end of the paper
Is folded into a 'V' before placing into the slot.
4. Depress the 'Reprint/Feed' switch to the 'Feed' position to
Feed and take up the paper. Do this until all the paper slack
Is taken up.
2.5 TAKE-UP UNLOADING
1. When it is desired to remove the taken up paper from the
printer, tear off the paper at the printer cut bar, if there
is still paper in printer.
2. Align finger slots on both right and left side discs.
3. While grasping the paper roll in take-up, push the paper
release to the left (indicated by arrow).
4. Simply pull the roll out of the take-up area and if necessary
gently move it side to side to clear the hubs on the discs.
5. Retrieve the core by pushing it out of the taken up roll.