4.2.4 SET RELATIVE VERTICAL COORDINATE (1B 5D x x x x)
This command adds the four position bytes to the current vertical
coordinate (values 0000 through Maximum Size). If the position is
preceded by a minus sign the value will decrement and the page
position will move up
4.2.5 HORIZONTAL TAB (1B 57 x)
This will cause the horizontal (XCORD) position to move right by 8
* number of bytes. This command can be used to set the horizontal
position at any time.
4.2.6 VERTICAL TAB (1B 56)
When a Vertical tab command is received any graphic lines
buffered will be printed and the paper will slew n number of dot
positions. The slew input is only one byte. Valid values are 0x0 to
0xFF (hexadecimal).
4.2.7 DOUBLE HIGH LINE ON (1B,64 or 0E)
When Double High is on all printable data will be expanded to
twice the height. This is true for barcodes, buffered PCX graphics,
non-buffered PCX graphics and text. This command goes active at the
start of a graphic print or when a carriage return is received
(current line and all following lines will be double high). This
does a vertical doubling in the print routine and not the buffer
routines. Vertical doubling reduces the buffer formatting time.
4.2.8 DOUBLE HIGH LINE OFF (1B,65 or 0F)
When Double High is set off it will be deactivated at the start of
a graphic print cycle (Page Mode) or a carriage return (Line Mode).
4.2.9 CLEAR PRINTING BUFFER (1B 6B X)
This commands by default is set to clear a dot line after that line
is shifted to the print head. This command is useful if the user
wants multiple copies of a form. These must be created in page
mode. If the form is setup utilizing the field command. These
field(s) may be used to overlay variable data in the respective
field. To enable clearing x = ASCII 0 while to disable x = ASCII 1
4.2.10 SET MARGIN (1B 6D x x x)
This command will reduce the horizontal buffer width by the input
value divided by 8. This effectively reduces the number of dots
across the print head and center justifies the buffer.
Example the print head is 640 dots (80mm) and we want to change the
effective head width to 608 dots, should be a multiple of eight.
Then we will send (640-608)/2 or 16 this will add a white space
margin
to
both
the
right
and
left
sides
of
2
bytes.
Содержание PX922E
Страница 1: ...Model PX922E THERMAL PANEL PRINTER PRODUCT MANUAL with ETHERNET Revised February 20 2018...
Страница 10: ...Figure 2 1...
Страница 13: ...FIGURE 2 2...
Страница 14: ...Figure 2 3...
