Setup Menu
1
2
Use the
/
keys to select an option.
3 4
Default setting:
By default, this option is set for normal TVs with 4:3
aspect ratio. Unless you're sure you have a
WIDESCREEN TV, do not change this setting. The 4:3
Letter Box setting is meant to enable the “Letterbox”
view on DVDs that contain both Letterbox and Pan/Scan
versions.If you are using a wide screen TV, set this
option to
to match the aspect ratio of your TV.
4:3 Pan Scan
16:9
Press
to exit.
SETUP
Default setting:
Your DVD Player will work with TVs based on the NTSC.
NTSC is the standard TV system in the USA and others.
NTSC
TV Shape (Aspect Ratio)
Standard Output
Default setting:
Normal TVs scan only in "interlaced" mode, because the
odd and even lines are interlaced together in alternate
scans. Progressive Scan is a scanning method offered
on high-end Tvs.
Interlace
Caution
Scan Mode
Do not change the Scan Mode setting unless you are
sure that your TV supports Progressive Scan.
1
If you have a P-SCAN TV, use the
key to change
the scan mode to
. A notification will
appear, if you do not have P-SCAN TV, the picture
will be restored to your previous setting.
4
Progressive
1
Use the
/
keys to select Brightness or Contrast
and the
/
keys to decrease or increase the
value.
5 6
3 4
A/V Output - Picture
Brightness
Press RETURN to exit
Picture
Contrast
2
Press
to exit the VIDEO MENU.
SETUP
Default setting:
Your DVD Player will work with televisions supporting
various video inputs including composite, S-Video,
component and Progressive Scan.
S-Video
Output
2
If you plan to use the component connection, use
the
key to change the output to
.
4
Component
3
Press
to exit the VIDEO MENU.
SETUP
1
When using the composite or S-Video connection,
select
.
S-Video
A/V Output - Audio
1
2
Use the
/
keys to select an option.
3 4
Default setting:
Determines the audio format output by the Optical and
Coaxial Digital Audio Output. When playing a Dolby 5.1
soundtrack, leave the setting on
to output the
encoded digital signal to a Digital Receiver with a Dolby
5.1 Decoder. If your receiver is not capable of decoding
a Dolby signal, use the
setting.
When playing CDs, leave this setting at
to output a
stereo signal on the Digital Output.
RAW
RAW
PCM
PCM
Press
to exit the AUDIO MENU.
SETUP
1
2
Use the
/
keys to select OFF or ON.
3 4
Default setting:
Dynamic Range Control, also called “Midnight Mode”
reduces the variations between loud and soft sounds in
DVD movies. This lets you turn the volume up to hear
softer sounds and dialog, and not worry about extremely
loud scenes disturbing others.
OFF
Press
to exit the AUDIO MENU.
SETUP
Digital Output Mode
Dynamic Range Control
Digital output mode
PCM
Press RETURN to exit
Audio
Dynamic range control
OFF
25
?
Changing the scan mode can result in
loss of picture. If the picture is not
correct the setting will be restored
automatically after 10 seconds.
Notification
Yes
No
