40
11. Vulcan Installation
11.3 Factors influencing the Installation Location
11.3.1 Electric power fields and magnetic fields
Please make sure that there are no strong electric lines running close to
the installation area. High voltage electric lines or strong magnetic fields
may interfere with the Vulcan impulse field.
Private houses typically do not have such strong electric lines (except
supply for electric ovens); these should run at sufficient distance away
from the installation area.
11.3.2 Position of pumps and filters
Pumps
Magnetic or electrical fields can exist in electric motors or in certain types
of water pumps. As a general rule, we therefore recommend to chose an
installation area at least 50 cm (20”) away (ideally after) electric motors
or pumps, if the setting in your installation area allows it.
Filters
Some filters may block the mono-calcium crystals that are supposed to
travel through the piping system. Crude filters (> 50 µ) do not remove
the mono-crystals and can be ignored. However, for more sensitive
filters (< 5-50 µ) it is recommended to install Vulcan after the filter.
11.3.3 Piping conditions of the installation area
Protective paint
Thick coatings like pipe protection (e.g. many layers of corrosion
protection paint) are not suitable for an installation. We recommend
removing thick layers of paint with sand paper prior to the installation
of a Vulcan unit.
Isolation material
Isolation material should be dismantled before the installation of a
Vulcan unit. After the installation it is good to replace the material as an
additional protection of the impulse bands.
Metallic splinters
Especially in an industrial setting you might be faced with uneven pipe
surfaces on the outside of the pipe. Metallic splinters can cause pitting
of the impulse bands and splinters should be treated with sand paper
prior to the installation.
www.cwt-international.com
Installation Examples
Christiani Wassertechnik GmbH (CWT)
Köpenicker Str. 154 | 10997 Berlin | Germany
Phone: +49 (0)30 - 236 077 80
Solar - US 02/2011
1. Solar Water Heating System
For best results, Vulcan should be placed
on the cold water inlet to the heat exchanger.
2. Solar Pool
H
eating and Filtration System
For optimal results, Vulcan should be placed
between the fi lter and the heat exchanger.
Circulation Pump
Solar Heating System
Vulcan
Water Heater
Hot
Water
Heat
Exchanger
Filtration Pump
Filter
Circulation
Pump
Heat Exchanger
Vulcan
Solar Heating System
Swimming Pool
Vulcan - Against Scale and Rust
Vulcan is the eco-friendly water treatment system
which protects your pipes and equipment against
scale and rust.
►
Eco-friendly solution without chemicals or salt
►
Reduction of existing scale in the piping system
►
Maximum working life of machinery and equipment
►
Important minerals remain in the water
►
Long life – fully cast in acrylic
►
Maintenance-free
►
10 year international warranty
Vulcan S25
M A D E I N
GERMANY
Quality - Made in Germany
►
Manufactured by Christiani Wassertechnik GmbH (CWT) Berlin
►
Over 30 years experience in physical water treatment
►
More than 150,000 satisfi ed customers world-wide
►
Available in more than 50 countries
Against Scale and Rust
M A D E I N
GERMANY
►
Easy installation without cutting the pipe
►
From
1
/
2
“
up to 20
“
pipe diameter
►
Works on all pipe materials – iron, copper, plastic,
stainless steel, PVC, compound pipes, PE-X, etc.
www.cwt-international.com
Installation Examples
Christiani Wassertechnik GmbH (CWT)
Köpenicker Str. 154 | 10997 Berlin | Germany
Phone: +49 (0)30 - 236 077 80
Solar - US 02/2011
1. Solar Water Heating System
For best results, Vulcan should be placed
on the cold water inlet to the heat exchanger.
2. Solar Pool
H
eating and Filtration System
For optimal results, Vulcan should be placed
between the fi lter and the heat exchanger.
Circulation Pump
Solar Heating System
Vulcan
Water Heater
Hot
Water
Heat
Exchanger
Filtration Pump
Filter
Circulation
Pump
Heat Exchanger
Vulcan
Solar Heating System
Swimming Pool
Vulcan - Against Scale and Rust
Vulcan is the eco-friendly water treatment system
which protects your pipes and equipment against
scale and rust.
►
Eco-friendly solution without chemicals or salt
►
Reduction of existing scale in the piping system
►
Maximum working life of machinery and equipment
►
Important minerals remain in the water
►
Long life – fully cast in acrylic
►
Maintenance-free
►
10 year international warranty
Vulcan S25
M A D E I N
GERMANY
Quality - Made in Germany
►
Manufactured by Christiani Wassertechnik GmbH (CWT) Berlin
►
Over 30 years experience in physical water treatment
►
More than 150,000 satisfi ed customers world-wide
►
Available in more than 50 countries
Against Scale and Rust
M A D E I N
GERMANY
►
Easy installation without cutting the pipe
►
From
1
/
2
“
up to 20
“
pipe diameter
►
Works on all pipe materials – iron, copper, plastic,
stainless steel, PVC, compound pipes, PE-X, etc.