Mounting instructions VacuStar WR 2500 / WR 3100 / WR 4000
Safety
9
2.2 Proper operation
The intended use is chiefly defined by the data in "Tab. 1: General
data Tab. 1" (page 14).
If explosive gases and gas mixtures are conveyed, the
following guidelines must be observed:
– 2014/34/EC
Devices and protection systems for the proper
use in explosive environments
– 99/92/EC
Health protection and safety of the employees in
potentially explosive areas
All specifications in these installation and operating instructions
have to be strictly complied with (technical data, ATEX regulations,
etc.)
All types of claims due to damage arising from improper use are
excluded. The operator alone shall be responsible for any damage
arising from improper use.
2.3 Acceptance and monitoring
The VacuStar WR itself is not subject to any acceptance and
monitoring obligation.
2.4 Operator's responsibility
See operating instructions "VacuStar WR 2500 / WR 3100 / WR
4000" for information about the responsibility of the operating
company.
2.5 Requirements placed upon the specialised staff
The mounting instructions specify the following qualification
requirements for the different fields of activity:
Specialists
are due to their technical training, knowledge and experience
and their knowledge of the pertinent regulations able to carry
out the work assigned to them and to independently recognize
potential hazards.
Electrical specialists
are, due to their technical training, knowledge and experiences
and their knowledge of the relevant standards and regulations,
able to work on electrical systems and to independently
recognize possible hazards.