Mounting instructions VacuStar WR 2500 / WR 3100 / WR 4000
Installation and assembly
23
6 Installation and assembly
6.1 Safety
Safety
WARNING!
Risk of explosion!
Only use components that are suitable for the zone
in which the unit is used when you install the unit in
an explosive atmosphere. An equipotential bonding
must be installed between the equipment and the
vehicle.
The safety equipment described in our mounting
instructions and installation instructions are
mandatory for a safe operation of the VacuStar WR
in explosive areas.
Electrical system
DANGER!
Mortal danger due to electric current!
There is mortal danger in case of contact with live
components.
Activated electrically driven components can start
to move uncontrolled and cause severest injuries.
Therefore:
– Switch off the electric power supply before
commencing any work and secure against
restarting.
– Only skilled electricians are allowed to carry out
any work on the electric systems, on electric
components and connections.
Dirt and lying about items
CAUTION!
Risk of tripping from dirt and objects lying
around!
Contamination and discarded items can lead to
slipping and tripping, resulting in substantial
injuries.
Therefore:
– Always keep the working area clean.
– Remove objects that are not required.
– Mark tripping points with yellow-and-black tape.
Please also observe all safety instructions in the operating
instructions "VacuStar WR 2500 / WR 3100 / WR 4000", Chapter
"Occupational safety and special risks".
