CVS VacuStar W1300, Руководство по эксплуатации

Страница: 12 / 38

VacuStar W900 / W1300 / W1600
Safety
12
Hazard notes and occupational safety
For your own safety and that of the machine, the following
information must be observed and complied with:
Improper operation
DANGER!
Danger due to improper operation!
– Only use VacuStar W in a perfect technical
condition. Malfunctions that are relevant for
safety have to be promptly eliminated.
– Conversions of the VacuStar W are not
permissible and can impair safety.
– Never bridge any safety equipment or put it out
of operation.
– Any work on the VacuStar W and/or on
electrical equipment must be carried out by
specialised staff.
– Repair and maintenance work may only be
carried out when the VacuStar W is stationary.
For this, the VacuStar W must be secured
against restarting!
– The VacuStar W may not be under pressure or
in a state of vacuum while work is being carried
out on it.
Close shut-off valve on the vehicle side and
vent the pipe between VacuStar W and shut-off
valve or manually relieve excess pressure at
safety valve. Observe pressure gauge!
– The drive's protective equipment may only be
removed when the VacuStar W is stationary
and has to be correctly refitted after completion
of work.
– Only dismantle accidental contact protection
after VacuStar W and pressure pipe have
cooled down.
– It is an environmental protection requirement
that any liquids arising during maintenance work
(e.g. cooling oil, cooling water, etc.) are
collected and disposed of in an environmentally
compatible manner.
– The machine may only be opened for
maintenance and repair work by specialised
staff if the VacuStar W is stationary and no
potentially explosive atmosphere is present.