CVS VacuStar W1300, Руководство по эксплуатации

Страница: 21 / 38

VacuStar W900 / W1300 / W1600
Start-up and operation
21
6
Start-up and operation
6.1 Safety during start-up
See chapter 2.7 Safety!
6.2 Start-up
Inspection prior to initial start-up The following points must be checked prior to initial start-up:

Fill in cooling water (clean tap water) up to the maximum
mark on the compensation reservoir.
Add antifreeze according to manufacturer's specifications.

Top up lubricating oil according to lubricating oil schedule. Fill
oil reservoir with oil up to max. 3 cm below filler neck thread.
Manually prelubricate the VacuStar W by means of the crank
handle (refer to lubricating oil inspection Chapter 6.4).
Start-up
Proceed as follows during start-up:

Open shut-off devices (if available)

Start the VacuStar W drive

Check operating data