Cutting Edge Unity AM Скачать руководство пользователя страница 56

Страница: 56 / 92

Limiter attack times are:

LOW: 10ms & greater

MID: 10ms & greater

PRESENCE: 5ms & greater

HIGH: 1ms & greater

Release

This sets the release time for the limiter stage and is adjustable for all four bands. Faster release times

correspond to higher numeric readings on the bar graph.

To adjust the Release Levels, use the jog wheel to select the Release Levels Sub-menu in the Limiter

Menu. Press the Enter button. Use the Select buttons to highlight the first Release Level you wish to

modify. Use the jog wheel to adjust the bar graph to the desired level. Again use the Select buttons to

highlight other Release Levels you wish to modify. When done, press the Enter button to store your

new settings and you will be returned to the Limiter Menu.

Limiter release times are:

LOW: Approximately up to 1 second

MID: Approximately up to 1 second

PRESENCE: Approximately up to 750ms

HIGH: Approximately up to 500ms

Threshold

This sets the level at which the limiter will begin operation and is adjustable for all four bands.

This is

not a drive control

. A high threshold level will yield less dynamic limiting (little or no meter activity)

and allows more peak energy to pass to the Clipper stage that follows. A low threshold level produces

more dynamic limiting (heavier meter activity) and reduces energy to the Clipper. This can cause the

audio to sound more “processed” and can possibly lose loudness.

To adjust the Threshold Levels, use the jog wheel to select the Threshold Levels Sub-menu in the

Limiter Menu. Press the Enter button. Use the Select buttons to highlight the first Threshold Level

you wish to modify. Use the jog wheel to adjust the bar graph to the desired level. Again use the

Select buttons to highlight other Threshold you wish to modify. When done, press the Enter button to

store your new settings and you will be returned to the Limiter Menu.

Remember, higher threshold levels correlate to lower bar graph readings. This can be confusing, so

be careful with when adjusting this parameter!

Содержание Unity AM





























































































Результаты поиска

Содержание Unity AM

Отзывы:

Cutting Edge Unity AM, Руководство пользователя, Страница: 56 / 92

Результаты поиска

Содержание Unity AM

Отзывы: