manualshive.com logo in svg

Cutting Edge Unity AM, Руководство пользователя

Поделиться
Скачать
Cutting Edge Unity AM Скачать руководство пользователя страница 55

55

To adjust the Mix Levels, use the jog wheel to select the Mix Levels Sub-menu in the Leveler Menu.

Press the Enter button. Use the Select buttons to highlight the first Mix Level you wish to modify.

Use the jog wheel to adjust the bar graph to the desired level. Again use the Select buttons to

highlight other Mix Levels you wish to modify. When done, press the Enter button to store your new

settings and you will be returned to the Leveler Menu.

It is recommended that any desired changes to the EQ of your sound be made with use of the mix

levels.

Gate Level

This sets the threshold point of processing for all four of the Leveler sections. On the bar graph, a

lower the setting correlates to a lower gate level.

To adjust the Gate Level, use the jog wheel to select the Gate Level Sub-menu in the Leveler Menu.

Press the Enter button. Use the jog wheel to adjust the bar graph to the desired level. When done,

press the Enter button to store your new settings and you will be returned to the Leveler Menu.

Limiter

A multiple time constant Limiter is dedicated to each Processor/Leveler band to provide consistent

peak control and low dynamic distortion. Each band is fed directly from the preceding Leveler band.

Adjustment is available for attack, release, and threshold levels for each Limiter band. An output mix

function allows contouring of the spectral levels that are sent to the subsequent Clipper section. On

pressing the Limiter button, the following sub-menus will appear:

ATTACK

RELEASE

THRESHOLD LEVELS

LIMITER MIX LEVELS

PATCH POINT INPUT

Attack

This sets the attack time for the limiter stage and is adjustable for all four bands. Faster attack times

correspond to higher numeric readings on the bar graph.

To adjust the Attack Levels, use the jog wheel to select the Attack Levels Sub-menu in the  Limiter

Menu. Press the Enter button. Use the Select buttons to highlight the first Attack Level you wish to

modify. Use the jog wheel to adjust the bar graph to the desired level. Again use the Select buttons to

highlight other Attack Levels you wish to modify. When done, press the Enter button to store your

new settings and you will be returned to the Limiter Menu.

Содержание Unity AM





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды