Currier Tech Ezip Скачать руководство пользователя страница 91

Страница: 91 / 123

When re-fitting the stem, make sure the handlebars are correctly aligned

and tightened using the appropriate hex wrench or allen key.

Do not over tighten.

Test the security of the handlebar within the stem, and the stem within

the fork steerer tube, by clamping the front wheel between your knees

and trying to move the handlebar up and down, and from side to side. The

handlebar should not move when applying turning pressure.

handlebars

The exact positioning of the handlebar is a matter of personal comfort.

For MTB bicycles, the bar should be approximately horizontal, with the

ends pointing back and slightly up. On MTB and racing style bicycles,

the handlebar is usually tightened in the stem by a single allen key bolt

or hexagonal bolt. On beach cruiser style bicycles there may be four

clamping bolts.

Please note that if you need to replace the fork on your bicycle at any

time, please consult a qualified bicycle technician.

never ride unless the handlebar clamping

mechanism has been securely tightened.

MtB handlebar assembly

Grip

Handlebar

Stem Bolt

Handlebar Stem

Stem Bolt Wedge

Make sure handlebars

and fork are facing

forward

Note, curved rake of

fork faces forward

Содержание Ezip




























































































































Результаты поиска

Содержание Ezip

Отзывы:

Currier Tech Ezip, Руководство пользователя, Страница: 91 / 123

Результаты поиска

Содержание Ezip

Отзывы: