Currier Tech Ezip Скачать руководство пользователя страница 63

Страница: 63 / 123

Tension adjusting

nut

open

Closed

1. With the quick release clamp in the OPEN position, insert the seatpost, with saddle attached, into the

bicycle’s seat tube.

2. Swing the quick release lever into the CLOSED position.

3. Grab the saddle with both hands and attempt to rotate it (and thus rotate the seatpost in the seat tube).

4. If you are able to force the seatpost out of alignment with the frame, the seatpost clamp needs to be adjusted.

Holding the quick release lever in the OPEN position with one hand, tighten the tension adjusting nut with

your other hand about 1/2 turn clockwise.

5. Attempt to swing the lever into the CLOSED position. If the lever cannot be pushed all the way to the

CLOSED position (ﬁgure b), return the lever to the OPEN position, then turn the tension adjusting nut

counterclockwise one-quarter turn and try tightening the lever again. Repeat steps 3, 4 & 5 until proper quick

release tension is achieved.

Содержание Ezip




























































































































Результаты поиска

Содержание Ezip

Отзывы:

Currier Tech Ezip, Руководство пользователя, Страница: 63 / 123

Результаты поиска

Содержание Ezip

Отзывы: