Currier Tech Ezip Скачать руководство пользователя страница 44

Страница: 44 / 123

Enlightened TMM

Bike

RTMB Bike

Power Switch - turn

to “ON” position

Red light should

turn “ON” ﬁrst

Orange light

should turn

“ON” while

charging

Plug charger into 24V battery charger port

Turn the charger’s power switch “ON”

The red light should come on indicating the charger has

power. The orange light should then come on indicating

that the charger is charging the battery. When the light

changes from orange to green the battery is full and the

charger has completed charging the battery.

use only currie authorized li-ion chargers with bicycles equipped with li-ion batteries.

using any other charger will damage the batteries and void your warranty.

* If the orange light flashes when the charger is plugged

into the battery, the charger does not recognise your

battery. Please contact Customer Service for help

resolving this issue.

Содержание Ezip




























































































































Результаты поиска

Содержание Ezip

Отзывы:

Currier Tech Ezip, Руководство пользователя, Страница: 44 / 123

Результаты поиска

Содержание Ezip

Отзывы: