Currier Tech Ezip Скачать руководство пользователя страница 55

Страница: 55 / 123

Bicycle assembly

Getting started

Open the carton from the top and remove the bicycle. Remove the

straps and protective wrapping from the bicycle. Inspect the bicycle

and all accessories and parts for possible shortages. It is recommended

that the threads and all moving parts in the parts package be lubricated

prior to installation.

do not discard packing materials until assembly

is complete to insure that no required parts are accidentally

discarded.

Note: Your bicycle may be equipped with different style

components than the ones illustrated.

We recommend that you consult a bicycle

specialist if you have doubts or concerns

as to your experience or ability to properly

assembly, repair, or maintain your bicycle.

assembly Guides

Individual assembly guides for each bicycle model can be found packaged with your bicycle, or viewed online by visiting

www.currietech.com and clicking on the page for your model.

- asse

Содержание Ezip




























































































































Результаты поиска

Содержание Ezip

Отзывы:

Currier Tech Ezip, Руководство пользователя, Страница: 55 / 123

Результаты поиска

Содержание Ezip

Отзывы: