Currier Tech Ezip, Руководство пользователя, Страница: 33 / 123

33
electRonic coMponents
Battery Gauge
When the throttle or sensor is engaged (powering the motor) and the
bicycle is in motion, the LEDs on the battery gauge (on the throttle or
separate unit) indicate instantaneous line voltage as measured at the
battery terminals – not the available energy in the battery pack.
The line voltage willwwing out from a dead stop, or going up a steep hill,
the motor will be under a high load and may show a reduced number of
LEDs or show the “Yellow” or even “Red” LED.
When the throttle is disengaged (i.e. no power to the motor due to
the bicycle being stationary or coasting) the LEDs on the throttle will
indicate the voltage of the battery pack. The voltage of the battery pack
will rise when no load is on the motor. The best indication of how much
battery life is remaining is to check the throttle LEDs, after reaching
cruising speed, on a flat straight road as this will allow the battery
voltage to stabilize and give a much more accurate reading.
TAG Throttle with
Battery Gauge
PAS / TAG
with Battery Gauge
pa
R
t
3
- elect
R
ical
co
M
ponents
TMM Control Box
with Battery Gauge