Currier Tech Ezip, Руководство пользователя, Страница: 41 / 123

41
charger
The hybrid electric bicycle comes with its own "Smart Charger” that connects with an easy-access charger port for recharging the
batteries. This charger unit has lights that show the battery charge status. Refer to the instructions that appear on the charger
unit and its instructions.
Batteries work best when they have a full charge, so always be sure to recharge them fully after each ride. If you leave them in a
run-down condition, without recharging them, it will shorten their life expectancy.
• Li-Ion (Lithium Ion) batteries - charge for 4-6 hours for full charge
• SLA (Sealed Lead Acid) batteries - charge for 6-10 hours for full charge
The charger may get warm to the touch, so make sure you charge them in an open area and do not lay anything on the charger
unit while charging. Although you cannot over-charge the batteries using the Currie “Smart Charger”, we recommend that you do
not leave the charger plugged in for more than 24 hours.
If your charger shows a solid green light after charging for a short period of time, your battery may have been only partially dis -
charged (short ride), or this may be the sign of a partially worn out battery with reduced storage capacity. Continue charging for
the full time, to cover all the bases. If the battery still has not charged, you may need to replace it.
Even with proper care, a rechargeable battery does not last forever. Average battery life depends on use and conditions.
the charger and charger port should be regularly inspected for damage (cord, plug, enclosure, etc.).
if damage is found stop using the affected part until the it can be repaired or replaced.
!