Currier Tech Ezip, Руководство пользователя, Страница: 42 / 123

42
How to use the SLA Chargers (standard)
1. Plug the charger into the outlet. The indicator light on the top of the charger
will illuminate when the charger is working properly. Refer to the sticker on the
charger for actual status light indication.
2. Insert the plug (XLR, 2v1h, DC, or 3v) into the charger port on the bike being
sure the charger plug is fully seated in the charger port. The light should be
solid red or blinking green to indicate charging however you will need to refer
to the sticker on the charger for actual status light indication, as there are
different chargers for different battery chemistries.
3. Once the battery reaches full charge, the light will return to solid green
however you will need to refer to the sticker on the charger for actual status
light indication.
4. When charging is complete, unplug the charger from the wall before removing
it from the charger port.
Charge for the full time. If the battery still has not charged, you may need to replace it.
use only currie authorized sla chargers with bicycles equipped with sla batteries.
using any other charger will damage the batteries and void your warranty.
!
1
2 3
4
1
2 3
4
1
2 3
4
1
2 3
4
1
2 3
4
XLR3 Plug
XLR4 Plug
(36 volt systems)
DC Plug
(male and female)
2v1h Plug 3v Plug
Example of SLA
Charger w/ XLR Plug