Currier Tech eFlow E3Nitro, Руководство пользователя

Страница: 31 / 52

Turning on the headlight and LCD backlight
Hold “–” for 3 seconds to turn on the LCD backlight and the bicycle
headlight/taillight (if present) .
The backlight will not function unless
the display is mounted on the bike
(with a battery installed) .
Hold “+” for
3 seconds to
change from PAS
to POD .
In PAS mode , the
motor will activate
when the system
senses the rider
applying pressure
to the pedals .
The amount of pedal pressure and the amount of motor assist are
proportional; harder pedaling will result in the motor providing more
assistance .
Use the “PWR LVL” display function to choose between light assist,
medium assist, and strong assist .
The throttle acts like a “boost”, allowing full control over 0-100% of
motor power at any time, regardless of power level .
In POD mode , only the throttle controls motor speed . There is no
power level setting in this mode, as the throttle can always apply
0-100% of motor power . The torque sensor is disabled, and there is no
need to pedal .
Changing the assist mode
p .
31 /52