Currier Tech eFlow E3Nitro, Руководство пользователя

Страница: 29 / 52

Setting the clock and speed units
Hold SET to confirm your changes.
Hold SET and “–” together to exit
the code screen and save the
changes .
4
In the setting screen,
tap SET to cycle
between characters .
Tap “+” or “–” to
change the flashing
character .
3
Hold SET and “–” together for 5
seconds to enter setup mode .
1
In setup mode, you will enter
codes corresponding to the
setting you wish to change .
Tap SET to cycle between digits . Hold
to confirm after the code is entered.
Tap “+” or “–” to set each digit
in the code .
2
Codes:
Set clock:
0001
Set speed units:
0003
Please do not experiment with undocumented codes . While other
settings exist, using them may cause the bike to become unsafe to
ride or to stop functioning altogether .
p .
29 /52