Currier Tech eFlow E3Nitro, Руководство пользователя

Страница: 21 / 52

CAUTION: Ensure that there is no one standing close to the
rear wheel, and that all clothing and other objects are a safe
distance away from the rear wheel when performing this
test. The rear wheel will spin at high speed during this test. If
necessary, ask a friend to assist with this test.
With the rear wheel off the ground, actuate the twist grip
throttle on the right side of the handlebar . The electric
motor will spin the rear wheel . With the throttle partially
actuated, alternately apply the left and right brake levers .
When the brake lever is applied, power to the motor
should turn “OFF” . Power will resume when the brake
lever is released, assuming that you continue to actuate
the throttle .
Note : Fully applying the right brake lever will not only turn
off the motor, the brake should also stop the spinning
wheel.
If actuation of either brake lever does not cause power to
the motor to turn off, consult your Currie Tech authorized
dealer, or the Currie Tech Customer Service Department
at (800) 377-4532 .
•
Battery: Use ONLY the battery supplied with your eFlow
bicycle .
CAUTION: Use of any battery not supplied with your eFlow
bicycle WILL void the warranty and may cause damage
to the electrical system of the bicycle and the hub motor.
Use only the battery supplied with the bicycle, or a battery
provided by Currie Tech as a replacement for the battery
supplied with the bicycle.
• Note : Prior to its first use, charge the battery supplied with
your bicycle for at least eight (8) hours.
p .
21 /52