Currier Tech eFlow E3Nitro, Руководство пользователя

Страница: 13 / 52

VI. Prior to your first ride
IMPORTANT NOTICE: All Currie Tech products are intended to be
delivered in a completely assembled and adjusted condition.
To ensure your total satisfaction, the agreement that we sign with
our dealers prohibits the sale of an unassembled Currie Tech
product. If you are sold an unassembled Currie Tech vehicle,
please call our Customer Service Department at (800) 377-4532.
WARNING: There are no user serviceable elements
incorporated into the motor, motor controller, battery, battery
charger, throttle, or wiring harness of your Currie Tech electric
bicycle. DO NOT ATTEMPT TO DISASSEMBLE OR ADJUST ANY OF
THESE COMPONENTS. Doing so may cause extensive damage
to these components, will void your warranty, and may cause
a hazardous condition. If you cannot resolve a problem using
the troubleshooting guide in Chapter IX, contact your Currie
Tech authorized dealer, or call the Currie Tech Customer Service
Department at (800) 377-4532 for assistance.
Note: Throughout this manual, we will refer to the “right side”
and the “left side” of the bicycle. For clarification purposes,
“left” and “right” are relative to your position when sitting on the
bicycle in the normal riding position.
Note: It is important to fully charge the battery prior to first
use. Unpack the battery and battery charger, and charge the
battery (per the instructions found in Section VIII of this manual)
for at least 8 hours before using the bicycle for the first time.
Before you ride:
Use the following checklist to ensure that your eFlow bicycle is
ready for safe and enjoyable use .
•
Quick releases : Make sure that the front wheel quick
release and seat height adjustment quick release are
properly adjusted and tight .
p .
13 /52