Currier Tech eFlow E3Nitro, Руководство пользователя

Страница: 18 / 52

the cam lever from rotating reduces clamping force . Less
than half a turn of the tension-adjusting nut can make
the difference between safe clamping force and unsafe
clamping force .
1 . With the quick release clamp in the OPEN position, insert
the seat post, with saddle attached, into the bicycle’s seat
tube . (Refer to the illustrations above .)
2 . Swing the quick release lever into the CLOSED position .
3 . Grab the saddle with both hands and attempt to push it
down .
4 . If you are able to force the seat post further into the frame,
the seat post clamp needs to be adjusted . Holding the quick
release lever in the OPEN position with one hand, tighten the
tension-adjusting nut with your other hand about 1/2 turn
clockwise .
5. Attempt to swing the lever into the CLOSED position. If the
lever cannot be pushed all the way to the CLOSED position
(fig. b), return the lever to the OPEN position, then turn the
tension adjusting nut counterclockwise one-quarter turn
and try tightening the lever again. Repeat steps 3, 4 & 5 until
Currie Tech Technical and Customer Service: +1 800-377-4532
p .
18 /52