- 1 -
Worksman WTX: Wide Track Tricycle
Assembly Instructions, Parts List, and Owners Manual
Assembly Video: http://worksmancycles.com/shopsite_sc/store/html/page24.html
The Worksman WTX WideTracker is a wonderfully simple, yet extremely
effective vehicle. Unlike an ordinary bicycle or tricycle, which includes a system
of gears and chains to turn the wheels, the WideTracker operates on a much more
basic idea. The pedals are DIRECTLY connected to the center of the front
wheel. Not only does this mean that there are no loose, dangling components on
this vehicle, but it also means COMPLETE CONTROL! Simply turn the pedals
forward in order to move forward. Turn the pedals backward in order to move
backward. If the rider stops pedaling, he or she stops. It’s as intuitive as
walking!
Who is it for?
The WTX WideTracker is fun for everyone. It’s an adult sized trike that works the same as a child’s trike. Whether you
just want to ride for fun or for therapeutic use, the WideTracker is a great choice. It is incredibly stable due to the wide
stance and wide tracking tires. It’s especially great for use in schools, hospitals and other institutions with special needs
populations. The WideTracker is also very durable, with a 250-pound weight capacity. (Please note that the Wide
Tracker is designed for smooth, level, controlled environments, as the direct drive system is also the braking system.)
(1)
Rear Wheel Assembly:
·
Remove blue caps from axle and slide through the frame.
·
Add 4 washers to each side, and then slide rear wheels onto axle.
·
Thread on lock nut on each end of the axle.
(2)
Attaching Front Wheel Assembly to Frame:
a)
Remove locknut, keyed washer, adjustment cone, and one of the bearings from the front wheel assembly.
b)
Make sure that the remaining bearing is sitting properly on the front fork cone, bearing balls upward.
c)
Slide the front fork tube up through the tube on the frame.
d)
Place remaining bearing (balls facing downward) into opening in tube.
e)
Thread on adjustment cone, and thread all the way to the bottom, so it fits over the bearing. Make sure bearing is sitting
correctly.
f)
Place keyed washer above adjustment cone, with key in slot.
g)
Place locknut above washer, and tighten securely.
*This manual is for:
WTX Tricycle
E
G
B
D
C
F
