7
ASSEMBLY AND OPERATING INSTRUCTIONS
—
CONTINUED
Figure 7A
WARNING
DANGER
CAUTION
3½"
Inner Row
4"
Inner Row
3" Row
2½" Row
Follow Bar
“Ears”
“START”
Saddle
Mounting
Hole
Shoe Stop
Handle
(Rear of Cart)
Front
of Cart
Front Gate
Front Gate
Rear Gate
Rear Gate
Figure 7
Handle
(Rear of Cart)
2. Decals indicate correct placement for all
components. To load the shoes and follow
bars onto the cart, start with the 3 ½" and
4" inner rows of the cart. (See Figure 7).
3. Open the front and rear gates for the row you will be loading. Place the shoe in the correct
row of the roller bed with the saddle mounting hole facing the rear of the cart and slide
the shoe until it touches the shoe stop. NOTE: To sit in the correct position, the shoe must
touch the shoe stop. (See Figure 7A). Return the rear gate in front of the shoe to its closed
position. Next, place the corresponding follow bar on the roller bed with the “ears” of the
follow bar facing upward and the end of the follow bar marked “START” facing the shoe.
Roll the follow bar towards the bending shoe until it reaches the rear gate. Return the front
gate to its closed position. Repeat this process for the remaining shoes and follow bars.
ALWAYS keep the gates closed on all rows when rolling the cart.
