background image

2

TABLE OF CONTENTS — 282 TRANSFER CART

Safety Alerts .................................................................................................2
Important Safety Information .....................................................................3
Specifications and Features ........................................................................4
Assembly and Operating Instructions ..................................................5-11
Exploded View and Parts List ...................................................................12

RETAIN SAFETY INFORMATION

This manual should be read and understood by all personnel who 

assemble, operate or service this Transfer Cart. Failure to understand 

how to safely assemble and operate this unit could result in injury 

or death. This Transfer Cart and hydraulic bender should only be 

assembled, operated and serviced by qualified personnel.

SAFETY ALERTS

Hazards or unsafe practices which, if not avoided, 

COULD result in serious personal injury or death.

WARNING

Hazards or unsafe practices which, if not avoided, 

COULD result in minor personal injury or property damage.

CAUTION

Immediate hazards which, if not avoided, WILL result in 

serious personal injury or death.

DANGER

THIS SAFETY SYMBOL is used to call your attention to instructions 

that concern your personal safety. It means: ATTENTION!  BE AWARE!  

THIS IS AN IMPORTANT SAFETY INSTRUCTION!
Read, understand, and follow these safety instructions. Failure to follow 

these safety instructions may result in injury or death. 

Safety Alert

Symbol

Hazards or unsafe practices which, if not avoided, 

COULD result in serious personal injury or death.

WARNING

Hazards or unsafe practices which, if not avoided, 

COULD result in minor personal injury or property damage.

CAUTION

Immediate hazards which, if not avoided, WILL result in 

serious personal injury or death.

DANGER

THIS SAFETY SYMBOL is used to call your attention to instructions 

that concern your personal safety. It means: ATTENTION!  BE AWARE!  

THIS IS AN IMPORTANT SAFETY INSTRUCTION!
Read, understand, and follow these safety instructions. Failure to follow 

these safety instructions may result in injury or death. 

Safety Alert

Symbol

THIS SAFETY SYMBOL is used to call your 

attention to instructions that concern your 

personal safety. It means: ATTENTION! BE 

AWARE! THIS IS AN IMPORTANT SAFETY 

INSTRUCTION!
Read, understand and follow these safety 

instructions. Failure to follow these safety 

instructions my result in injury or death.

Содержание 282













Отзывы: