Current Tools 282 Скачать руководство пользователя

Страница: 3 / 12

ALWAYS inspect the cart before operating. Replace any

damaged, missing or worn parts. Check for alignment of moving parts,

binding of moving parts, breakage of parts and any other conditions that

may affect its operation.

DO NOT lift cart while loaded.

ONLY lift the cart from underneath the cart base, NEVER lift the cart by the

roller bed.

ALWAYS unload the cart prior to transporting.

NEVER alter this equipment. Doing so will void the warranty.

ALWAYS use appropriate bending shoe, follow bar and saddle for

the size conduit to be bent.

ALWAYS keep shoe group components under control when rolling or using

the transfer cart.

ALWAYS keep the gates closed on all rows when rolling the cart and when

the rows are not in use.

ONLY roll on a firm, flat, smooth surface.

ALWAYS keep the path of the shoe group components clear of

obstructions.

ALWAYS load or unload the bender components onto or off of their

designated locations on the cart.

Some hydraulic bender components exceed 50 lbs. and will require more

than one person to lift, transport and assemble.

Only use the transfer cart for its intended purpose as specified

in this manual.

ALWAYS keep hands and feet away from pinch points.

ALWAYS wear approved safety glasses.

ALWAYS wear proper apparel. Do not wear loose clothing, neckties, rings,

bracelets, or other jewelry which may get caught in moving parts. Non-slip

footwear is recommended. Wear protective hair covering to contain long

hair.

ALWAYS keep children away. All visitors should remain a safe

distance from work area.

NEVER sit, ride or stand on the transfer cart.

ONLY use with shoe group components from the Current Tools Model #254

Hydraulic Bender OR Greenlee

Model #881 CamTrack

Hydraulic Bender*

Greenlee

and CamTrack

are registered trademarks of Greenlee Tools Inc., which has no affiliation

with Current Tools.

IMPORTANT SAFETY INFORMATION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION
WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

WARNING

DANGER

CAUTION

Содержание 282













Результаты поиска

Содержание 282

Отзывы:

Похожие инструкции для 282

Бренды по названию

Популярные бренды

Current Tools 282, Руководство по сборке, эксплуатации, безопасности и каталог запасных частей

Результаты поиска

Содержание 282

Отзывы:

Похожие инструкции для 282

Бренды по названию

Популярные бренды