7
Figure 2.3.2 - Add or remove pin carriers
Figure 2.3.3 - Add or remove string carriers
3. ADJUST NUMBER OF CARRIERS
3.1 - It may be necessary to add or remove carriers based on the
curtain size, fullness, and pleat spacing. To add or remove carriers,
remove the motor if it is installed. Then, loosen the hardstop screw
and slide it out of the track. See Figure 2.3.1.
3.2 - For loose carriers, insert or remove carriers until the
correct amount remain in the track. Center draw applications
may require adding or subtracting carriers from each side.
See Figure 2.3.2.
3.3 - For carriers that are strung together, the entire string will
need to be changed if more or less carriers are desired (dictated
by carrier string spacing). Contact Current Products Corp.
customer support for details. See Figure 2.3.3.
Figure 2.3.1 - Remove hardstop
