6
Figure 2.2.1 - Camlock in open position
Figure 2.2.2 - Push the track up and tighten camlock.
Figure 2.2.3 - Screw into splice or place brackets on either side
of splice.
2A. INSTALL THE TRACK
2.1 - Begin with the camlocks in the open position. See Figure 2.2.1.
If using fascia, install fascia clips before track installation.
For ceiling mount installations be sure the return clips are installed
prior to installation of the track to the camlocks.
2.2 - On
unspliced
tracks, starting in the middle, secure the track
onto each of the brackets using the camlock. For center draw
applications, align the centerline of the track with the centerline of
the window opening.
To lock, twist camlock arm clockwise. See Figure 2.2.2.
2.3 - If your track is
spliced
, either:
Screw the center bracket screw into the center hole in the splice,
loosening and retightening the set screws to adjust splice placement
if necessary.
Or if using heavy curtains, place one bracket 8 inches to the left, and
one bracket 8 inches to the right of the splice seam.
See Figure 2.2.3.
2.4 - For wall mount applications, once all the camlocks are closed,
use a Phillips Head screwdriver to tighten each camlock.
