16
EXPERT WW rev.12
EXPERT WW
4.12. Version
This menu shows the version number of your
controller program. This piece of information
is useful to get technical support.
1. Select:
Main menu
Setup *
User
Version
* A password may be required to access this
menu.
EXPERT WW
Software
VX.X
Atm Advanced
Version :
Release :
Model :
4.11. Test Mode
The test mode is used to simulate tempera-
ture changes and to verify the controller’s
performances. When the test is enabled, all
outputs of the controller operate according
to the simulated temperature.
1. Select:
Main menu
Setup *
Test Mode
* A password may be required to access this menu.
Test mode
Test Mode
Off
Temperature
72.3 °F
2. Set the following parameters:
Test Mode —
Switch on the test mode status
and then set the simulated temperature to the
desired value.
The test automatically ends after 15 min-
utes of inactivity. It can also end sooner
by switching the test mode status back
to “Off”.
