12
How to Detach/Attach Pressure Packing
1
How to Detach Pressure Packing
Pull the packing gradually by grabbing its outer part or its outer and stainless parts. (Wash it
with a neutral detergent and a sponge.)
2
How to Attach Pressure Packing
Insert the packing into the groove of the clean cover. As shown in the figure to the right, turn the
clean cover while pressing the inner and outer parts of the packing with both of your thumbs.
-
If the packing is attached loosely to the clean cover, steam may escape, and cooking and
warming may not be performed properly. (Before attaching the pressure packing, be sure to
align the bumps of the packing with those of the clean cover. Refer to p.11.)
3
Check Assembly Status of Pressure Packing
Lay the clean cover on a clean place and push inner and outer parts of the packing again with
your thumbs or index fingers while turning it.
(Check if the packing maintains a circular shape.)
Properly Assembled
Improperly Assembled
The packing has a circular shape.
If the packing does not have a circular shape, it is assembled
incorrectly. (It is easier to assemble right after washing the packing.)
Caution: If the inner packing is not installed, steam may leak.
Caution: If the pressure packing is not installed, steam may leak.
How to Detach/Attach Inner Packing
Caution
•
Do not remove the inner packing unless it is absolutely necessary to do so.
•
It is recommended to clean it with clean cloths without removing it.
1
Hold the inner packing and pull it out to the direction
of the arrow to detach it for cleaning.
2
Clean the inner packing with a neutral detergent and a
sponge, and remove moisture from it. As shown in the figure
below, insert the packing into the groove. Then, press and turn
the inner and outer parts of the packing with index fingers.
PUSH
PUSH
PUSH
PUSH
PUSH
PUSH
Cleaning and Maintenance