Cube Robotic Autoloader, Руководство пользователя

Страница: 9 / 50

5
3. The LCD Control Panel
*The below image is for reference only. Your key assignment and appearance may differ.
Figure 1-5 below shows the LCD Control Panel. This panel has a two-line by 20 character LCD
display to provide user feedback and eight push buttons to control the operation of this system.
The functions for these buttons are shown in Table 1-1.
Figure 1-5 LCD Control Panel Layout
Table 1-1: Front Panel Controls
Control Name Function
Up Scroll up through the menu or list.
Down Scroll down through the menu or list.
Enter Execute the function. Also referred to as OK in the Menus.
Escape Go back to the previous function.
Copy
Quick key to make a copy. Pressing this key automatically
performs the
Copy job.
Test
Quick key to make a simulation of the copy process. Pressing this
key automatically performs the
Test job.
Speed
Quick key to change the duplication speed. Pressing this key
automatically guides you to the functions that allow you to change
various duplication speeds.
Source
Quick key to change the master reading source. However, since
HDD is the only valid source, no other options are offered at the
time of this publication.