Cube Robotic Autoloader, Руководство пользователя

Страница: 37 / 50

33
System Utilities
1. Disc Info
Disc Info
Please Insert Disc
Disc Info
3 Disc Detected, GO?
Setup
12. CD Overburn
CD Overburn
ON
CD Overburn
OFF
11.11 CD Overburn
Most CD-R media has a capacity of 650MB or 700MB. The burning starts from the center of the
CD and works its way out but stops before the physical edge of the CD. Overburning is a burning
method to bypass the disc limitations for the edge of the CD. This can provide slightly higher
capacity storage, however, it has also been known to create compatibility issues. Please use it
with caution.
Use the
Up or Down button to select the 12. CD Overburn
menu and press the ENT/Enter button to enter that menu.
Use the Up or Down button to select whether the CD Overburn
feature is ON or OFF, and press the ENT/Enter button to select that
option.
12. System Utilities
System Utilities is used to provide information pertaining to the autoloader as well as modification
to maintain proper functioning. The System Utilities are:
1 Disc Info
2 System Info
3 Device Info
4 Load Default
5 Update Firmware
12.1 Disc Info
Use the Disc Info utility to identify the type and other information about your blank recordable
media.
.
Note: The Disc Info function does not use the robotic capabilities of the system. You must
manually insert the discs into the drives.
Use the Up or Down button to select the Disc Info menu and
press the ENT/Enter button to enter that menu. The system will
proceed to the Please Insert Disc menu.
Place your disc(s) into the drives.
After a few seconds, the system will detect the discs and ask you if
you want to proceed. Wait until all of the discs have been detected
and press the
ENT/Enter button to continue.