background image

 15 

Duplicator      2.20 
1. Copy         (SM) 

Choose Partition 
[FUN.VEF] 4012MB 

Counter: 
No Counter 

Preparing... 
Please Wait 

OK:  0 NG:  0 NB:  0 
Input Bin > Drive01 

Processing... 
Please Wait 

1.1.2  Start the Copying Process 

 
Go back to the 

1. Copy

 Menu. Use the 

Up or 

Down 

button to navigate to the following 

screen:  
 

Start the Copy Process. Insert your blank discs on to the Input 
Spindle and press the 

ENT/Enter

 button to enter the 

1.Copy 

menu. 

You will see the 

Choose Partition

 menu:  

 

 
Use the 

Up or 

Down

 button to find the partition where your 

master disc is stored. Press the 

ENT/Enter

 button to select that 

Partition. Next, you will see the 

Counter Selection

 menu:  

 
 

Follow the instructions shown in “Setting Counters” on page 14 to 
continue. Once the counters have been set, press the 

ENT/Enter

 

button to confirm. You will see the 

Preparing

 screen: 

 

 
After a short interval, the robotic loader will pick the top disc from the 
input spindle and place it into one of the drives. As this is happening, 
you will see a screen similar to below:  

 
 

This information screen shows what is happening. In this case, the 
loader has taken a disc from the input spindle and is placing it into 
Drive 1.  

 
 
The loader will continue to remove discs from the input spindle and place those into drives until 
either all of the drives are full, or the count that you loaded into the counter is reached.  
 

 
It takes a few seconds for the autoloader to recognize all the discs.  
 

 
 

Содержание Robotic Autoloader



















































Отзывы: