Cube Robotic Autoloader, Руководство пользователя

Страница: 25 / 50

21
Processing...
Please Wait
The loader will continue to remove discs from the input spindle and place them into drives until
either all of the drives are full, or the count that you loaded into the counter is reached.
It takes a few seconds for the autoloader to recognize all the discs.
The system will then compare the discs in the trays to the content of the master disc residing in the
Hard Drive partition you specified. When the comparison job is complete, the autoloader will place
the good discs and failed discs into corresponding areas and you will see a PASS/FAIL result
screen similar to this:
Counter Specified No Counter Specified
PASS 16 FAIL 0
Job Completed! Press OK to Finish
or:
Input Bin Empty
Reset Hoppers?
¾
“PASS 16” indicates 16 discs have
been compared successfully.
¾
“FAIL 0” indicates none of the discs
have failed.
Press the
ENT/Enter button to finish
¾
“Input Bin Empty” indicates that the
system has run out of discs to
compare.
If you have more discs to compare, you
can empty the Output Spindle; place
the discs to be compared in the Input
Spindle and Press the
ENT/Enter
button to continue.
If you have no more discs to compare,
press the
ESC/Escape button to
terminate the operation.
4. Test+Copy
With the Test + Copy menu option, the autoloader simulates the copying process, and then
makes copies if everything works correctly. If a failure is encountered on a disc during the
simulation, it will not be copied during the copying process. The discs that passed the simulation
will move on to the copying process. If any part of this process fails, the job will be aborted.
Operation in
Test+Copy menu is identical to operation in Copy menu. See “Copy” on page 16 for
instructions.
5. Copy+Compare
The Copy + Compare menu option is used to make verified copies. After the copy process is done,
the autoloader automatically compares the copies to the master content residing in the hard drive
to ensure that they are identical. When the operation is complete, the autoloader automatically
places good discs on to the Output Spindle. If any part of this process fails, the job will be aborted.
Operation in
Copy+Compare menu is identical to operation in Copy menu. See “Copy” on page 16
for instructions.