Cube Robotic Autoloader, Руководство пользователя

Страница: 39 / 50

35
Duplicator 2.20
14.Manage Accounts
Enter PWD
[ ] OK?
13. Loader Utilities
The Loader Utilities menu consists of following submenu(s):
1 Update Robot Firmware
13.1 Update Robot Firmware
Use this utility to update the software in your autoloader’s robot controller. To update, insert the
manufacturer’s Certified Update CD into the 1
st
tray and make sure no other discs are in the other
trays. Then you can press the ENT/Enter button to update. You should not upgrade your
autoloader's robot firmware unless your system is becoming unstable or you are advised to do so
by Tech Support.
14. Manage Accounts
This feature allows the administrator to:
¾
Create user accounts and passwords to prevent unauthorized use of this autoloader.
¾
Edit existing user account information, including name and password.
¾
Delete existing user account(s).
¾
Enable or disable “Manage Accounts”
Manage Accounts is disabled by default. Prior to activating the “Manage Accounts” feature, the
autoloader recognizes all users as the Administrator. The pre-defined password for this function is
“0000.” By adding additional users, each individual user has his or her own settings.
To take advantage of this feature, follow these instructions:
¾
Change the Administrator password. Refer to “Edit User Info” on page 41 for additional
information.
¾
Create a User Name and Password for each authorized person on this autoloader. Refer
to “Create User” on page 41 for additional information.
¾
Enable the “Manage Accounts” feature by turning on the “Password on Bootup” setting.
Refer to “Password on Bootup” on page 42 for additional information.
Note: This system comes with a standard license that allows you to create up to 32
users. However, if you desire to create more than 32 users, please contact Tech
Support Service regarding our special 64 user license pack.
To access the Manage Accounts feature, you need to perform the following tasks:
Use the Up or Down button to select the Manage Accounts
menu and press the ENT/Enter button to enter that menu. You will
be shown the Enter Password menu.
The system will ask you for the Administrator's Password.