Cub Crafters CARBON CUB SS CC11-160, Руководство по обслуживанию

Страница: 285 / 356

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10000AMM
6.3.19
Date: 10/28/2010 Page: 3
2. LANDING AND TAXI LIGHTS
The landing/taxi light consists of one PAR 36 type lamp mounted in the left wing leading
edge. The light is covered with a Plexiglas lens the same shape of the leading edge. A
breaker switch on the instrument panel turns on the light.
(1) REMOVAL
(a) Remove the lens
(b) Remove 4 screws and the lamp.
(c) Disconnect wiring.
(2) INSTALLATION
(a) Attach wiring.
(b) Reposition front mounting plate and secure with 4 screws.
(c) Reattach the lens being very careful not to crack the Plexiglas.
3. INCANDESCENT LIGHTING SYSTEM
(1) TROUBLESHOOTING
PROBLEM PROBABLE CAUSE REMEDY
Bulb does not light up Bulb burnt out Replace bulb
Circuit breaker tripped Reset circuit breaker
Loose wiring Check wiring to bulb
(2)
NAVIGATION LIGHTS
(1) GENERAL
The colors of the navigation lights conform to standard aeronautical practice. The left
wing navigation light is red, the right wing navigation light is green and the tail
navigation light is white. A breaker switch on the instrument panel turns on all three
lights.