Cub Crafters CARBON CUB SS CC11-160, Руководство по обслуживанию

Страница: 11 / 356

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
Manual number SSC10000AMM
1
Date: 04/18/2013 Page: 1
1 SCOPE
1.1 General
This manual has been prepared by Cub Crafters, Inc. in accordance with the standards of
ASTM F2483. The manual provides the practices for the servicing and the maintenance of Cub
Crafters’ CC11-160 Carbon Cub Light Sport Aircraft (LSA) and guidance for the qualifications
necessary to perform the various levels of maintenance. It provides practices and guidance for
servicing and maintenance that can be performed by a qualified pilot and owner, the preventive
maintenance requirements of a 100-hour and an annual inspection, and the corrective line
maintenance actions for the repairs, alterations, and the removal and re-installation of
components.
The owner is reminded that it is her/his responsibility to ensure that Cub Crafters has the
appropriate contact information so that flight safety and other important information can be
c
ommunicated in a timely manner. Please use the form on Cub Crafters’ website
( www.cubcrafters.com ) to register any changes in ownership or address. Alternatively, complete
the form on page 3 and email, fax or mail to the address below:
E-mail: support@cubcrafters.com
Fax: 509 248-1421
Address: 1918 South 16
th
Avenue
Yakima WA 98903
Cub Crafters may also be contacted by telephone at (509) 248-9491.
(note that Cub Crafters is on US Pacific Time and office hours are from 8:00 am to 5:00 pm.)
Service Alerts, Service Bulletins and the latest versions of the Pilot’s Operating Handbook and
Maintenance Manual Supplements for this aircraft may be found on Cub Crafters’ website
(
www.cubcrafters.com ).
1.2 Safety of Flight and Service Difficulty Reporting
Please report any service difficulties or any other issue relating to flight safety directly to Cub
Crafters using the form on the website. Alternatively complete the form on Page 5 and email or
fax to the address in Section 1.1.
1.3 Pilot/Owner Servicing and Maintenance
This manual identifies servicing and maintenance actions, which can be performed by the
owner/pilot, as, identified in ASTM F2483, and who holds a light sport aircraft pilot’s certificate
(or greater) and who may not have received any specific authorized Carbon Cub training. The
maintenance actions authorized in this manual comply with the intent of FAA 14 CFR Part 43.3
with regard to preventive maintenance.