Cub Crafters CARBON CUB SS CC11-160, Руководство по обслуживанию

Страница: 110 / 356

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
5.4.15
Manual number SSC10000AMM
Page: 6 Date: 01/31/2011
3. REAR SEAT INSTALLATION
Slide the seat straps and nylon straps on to the cross bar in the correct order. Install the cross
bar in to the fuselage slots. See Figure 5.
Connect the two cinched nylon straps to the floorboard to hold the seat cross bar in place. See
Figure 4. Install the seat cushion by lining up the hook and loop tape on the bottom of the seat
cushion and top of rear seat.
Ensure the straps in front of the seat are cinched tight enough to hold cross bar in slots at either
end. Ensure the top straps are secure and verify proper routing of straps around fuselage tube
and through slide adjuster. See Figure 7.
Figure 7 - Rear Seat Upper Strap Routing
4. MAINTENANCE
No major repair or alterations, as outlined in ASTM F2483, FAR 43, or in this manual are
authorized at this time.
To obtain engineering approvals for any major repairs or alterations, please contact Cub
Crafters at:
Cub Crafters, Inc.
1918 South 16
th
Avenue
Yakima, WA. 98903
Tel: 509-248-9491
support@cubcrafters.com