5
7. Default values
SDTU-01/ET10
is pre-configured with the following parameters; user
may also re-load the default parameters by selecting
Default
from the
main menu.
LAN and VC setting
WAN and SDSL
Ethernet (local) IP: 0.0.0.0
Side select: CPE (RT) side
Subnet mask: 0.0.0.0
Auto Rate: disable
Protocol: RFC1483, bridge Mode
Rate select: 2320K
VPI/VCI: 8/35
Sign/Magnitude Bit Sequence:
normal
Class level (QoS): UBR
Data Bit Polarity: Normal
PCR (Peak cell rate): 640
Scrambling: enable
Spanning tree: disable
Idle-cell-sending: enable
Packet control: IP and PPPoE
DHCP setting:
Max-lease-time: 86400 seconds