31
IPoA (protocol in use and enabled interface IP
address)…….………………………………..210.62.2.195
PPPoA (protocol in use and enabled interface IP
address)…….……………………………???.???.???.???
(Before get IP from service provider)
Information for PAT incoming table:
No. (PAT table number, assign by system)……………..1
I/f name|Wanip (enabled interface and WAN IP
address)………………………………………………pppoa
Port/Protocal (Port number and transmitted Protocol in
use)………………………………………………….434/udp
Server IP (global server IP address)………192.62.2.134
PPPOA MENU COMMAND
Adduser
Chpass
deluser
setqos
Show
ADDUSER
Enable a VC by giving a VPI and VCI numbers, also Configure user ID and
authentication protocol for security negotiation
Syntax:
adduser [<vpi>/]<vci> <userid> <chap|pap|none>
Parameters:
vpi: decimal value of VPI number, 0 to 4095
vci: decimal value of VCI number, 1 to 65535
userid: User ID
“chap” and “pap”: choose authentication protocol, the
default is none. (chap: challenge handshake
authentication protocol, pap: password authentication
protocol)
Example:
Response:
> pppoa> adduser 2/32 xavi chap
New Password: ********
Confirm password again: ********
