CSI Wireless SBX-3, Справочное руководство

Страница: 71 / 110

SBX-3 Reference Manual
53
For such an installation, remove the protective
backing from both sides of the adhesive foam pad, and affix the foam
pad to the non-ferrous surface. Place the disc on top of the foam pad.
You can then place the magnetic mount securely on the metal plate,
and remove as necessary.
The mounting extension may also be removed from the magnetic disk
and used as a threaded insert for survey applications that use the
common 5/8
th
-inch thread.
4.3.2 Permanent Mount
A stainless steel permanent mount (P/N 604-0002-000) is available for
installation of the MBA-3 / MBA-3A, MBL-3, MGW-1, or MGL-3
antennas. It consists of a hollow threaded post on a circular base.
Three screws are required to secure this mount to the mounting
surface.
4.3.3 Survey Adapter
The Survey Adapter is a threaded insert available for use with the MBL-
3, MGL-3, and MGW -1 antennas. It converts the standard 1-14-UNS-
2B thread to a 5/8
th
-inch thread frequently used with survey equipment
(P/N 676-0005-xxx). This survey adapter is the same part as used for
the shaft of the magnetic mount