CSI Wireless SBX-3, Справочное руководство

Страница: 37 / 110

SBX-3 Reference Manual
19
2.4 SBX-3 Evaluation Module
Default Settings
Table 2-1 presents the factory default Evaluation Module configuration
settings.
Table 2-1 Evaluation Module Default Configuration
Communication
Level
Baud Rate Antenna Output
Voltage
RS-232C 4800 10 VDC
2.5 Installing the SBX-3 Evaluation Module
To ensure optimum performance and ease of operation, observe the
following considerations when installing the Evaluation Module.
2.5.1 Placement
The Universal Mounting Bracket (U-bracket) supplied with the
evaluation kit is used to secure the receiver to the selected mounting
surface. You may install this bracket from either the top or the bottom
using the thumbscrews provided. The U-bracket allows you to tilt the
receiver up or down to achieve the best viewing angle to monitor
receiver status.