Section 4
4-16
350 Express Series
DC Panel Circuit Breaker Functions
DC Circuit Breaker
Function
DC MAIN
Put the breaker in the ON position to connect power to the rest of the circuit breakers on the panel except the bilge
pumps and the CO detectors. The automatic bilge pump circuit breakers are mounted on the AUTOMATIC BILGE
PUMP C.B. PANEL located in the engine room. If any of the breakers are tripped or the white button has popped
out, reset them immediately. The STEREO MEM, SHOWER SUMPS and CO DETECTORS circuit breakers are
connected to +12V, which is switched on and off at the house battery switch. The CO DETECTORS and SHOWER
SUMPS circuit breakers should be reset immediately if they are tripped.
CAUTION: If the house battery switch is off, the CO detectors are NOT ACTIVE. There is no CO detector
warning if the house battery switch is off.
LIGHTS CABIN
Put the breaker in the ON position to connect power to the cabin light switches.
HEAD PUMP
Put the breaker in the ON position to turn on the head pump.
FRESH WATER PUMP
Put the breaker in the ON position to turn on the freshwater pump and the freshwater tank gauge. The pump will
turn on automatically when a freshwater demand is actuated, i.e., opening a faucet, and will run at the speed
required to maintain water flow.
MACERATOR/SPARE
Put the breaker in the ON position to turn on the macerator.
SHOWER SUMP
This breaker is for the shower sump.
CO DETECT
This breaker is for the carbon monoxide detectors.
STEREO MEM
This breaker is for the stereo memory.
REFRIGERATOR
Put the breaker in the ON position to connect power to the refrigerator.
ENTERTAINMENT
SYSTEM
Put the breaker in the ON position to connect power to the entertainment system.
ACCESSORY
This breaker is for the corresponding accessory.
Downloaded
from
CruisersOwnersForum
http://www.CruisersOwnersForum.com
